Articles in the category of 树莓派脚本

  1. Home
  2. 树莓派脚本

【树莓派】温控风扇脚本（shell版）

一个简单的脚本，和python版的一样，只是去除python版的RPi库的依赖。较为完善的是Golang版配合crontab做定时任务#每五分钟执行一次 */5 * * * * /home/pi/fen.shfen.sh文件#!/bin/bash a=$(cat /sys/class/thermal/thermal_zone0/temp) temp=$((a/1000)) pin=14 i...

  • Rehtt
  • September 6, 2020
  • 4 comments
    •

    【树莓派】ZERO W上快速安装Open CV

    执行命令添加源：echo 'deb [trusted=yes] http://dl.bintray.com/yoursunny/PiZero stretch-backports main' |\ sudo tee /etc/apt/sources.list.d/bintray-yoursunny-PiZero.list sudo apt updatePython3:sudo apt ins...

  • Rehtt
  • January 22, 2019
  • No comments
    •

    【树莓派】延时拍照并上传到服务端

    服务端：# -*- coding: utf-8 -*- import socket import os import time #监听ip和端口 IP_Post = ('0.0.0.0', 1234) sk = socket.socket() sk.bind(IP_Post) sk.listen(5) while True: conn, addr = sk.accept() ...

  • Rehtt
  • January 22, 2019
  • No comments
    •

    【树莓派】Docker安装脚本

    #!/bin/sh sudo apt update sudo apt install -y apt-transport-https ca-certificates curl gnupg2 lsb-release software-properties-common curl -fsSL https://mirrors.ustc.edu.cn/docker-ce/linux/raspbian/...

  • Rehtt
  • January 20, 2019
  • 1 comments
    •

    【树莓派】使用Python驱动SSD1306 OLED显示

    0x00因为之前用的Nokia5110显示有故障，所以在网友的推荐下接触到了SSD1306。显示模块型号：SSD1306 OLED显示范围：单色 128*64点阵测试机：树莓派zero w测试机系统：Raspbian stretch life开发语言：Python3采用驱动库：Adafruit Python SSD13060x01环境准备1.树莓派开启I2C接口终端输入sudo raspi-...

  • Rehtt
  • September 11, 2018
  • No comments